Analytical method development and validation of Glimepiride in bulk and tablet dosage form using UV Spectrophotometer

Authors

  • V Asha Ranjani
  • C Abigna
  • D Akhilesh kumar
  • K Prashanthi
  • M Sindhuja

DOI:

https://doi.org/10.61096/ijpar.v2.iss4.2013.127-133

Keywords:

Glimepiride, UV- Visible Spectroscopy, Validation, Method Development

Abstract

The main objective of the study is to develop and validate an analytical method for quantitative determination of
Glimepiride in bulk and tablet dosage form using UV-Visible Spectroscopy. The Glimepiride shows maximum
absorption at 231nm and obeys Beer’s law in the range of 5-10µg/ml.For the method development we have selected a
perfect solvent system using solvent such as NaOH. Calibration curve has been plotted. The assay should be carried
and percentage recovery needs to be calculated. For the validation of the analytical method developed is carried out by
determining parameters like Linearity, range, LOD, LOQ, Accuracy, Precision, Ruggedness.The calibration plot did
not deviate from linearity because of its low intercept value, the LOD and LOQ values were found to be 25.93µg/ml
and 86.44µg/ml respectively which shows the sensitivity of the method. The ruggedness is found to be less than 2%.
The percentage recovery was assessed using 3 different solutions of 8.0, 10.0, 12.0 µg/ml and the results obtained
were 98, 101.2, and 102% respectively. The developed method was applied to the quantification of Glimepiride in
tablets available in local market. It can be seen that the results obtained by proposed method was very much similar to
that of established methods.

Downloads

Published

2013-10-07

How to Cite

V Asha Ranjani, C Abigna, D Akhilesh kumar, K Prashanthi, & M Sindhuja. (2013). Analytical method development and validation of Glimepiride in bulk and tablet dosage form using UV Spectrophotometer. IJPAR JOURNAL, 2(4), 127–133. https://doi.org/10.61096/ijpar.v2.iss4.2013.127-133